10KW Medium frequency inverter spot welder
Medium frequency spot welding machine is a set of advanced welding equipment. Widely used, welding transformers are small in size and have a large output of energy. Used in the automotive industry, one of the integrated transformer speed welding tongs is more advantageous. Its superior performance is due to the fact that the frequency of its welding transformer has been increased from the current mains 50/60Hz to 1000Hz, which greatly reduces the weight of the core material, and the rectifier diode in the secondary circuit of the transformer converts the electrical energy into a DC power supply for welding.
Features:
Functional characteristics and uses of inverter medium frequency spot welding machine:
1: High welding stability;
2: Power saving of more than 30%, low operating costs;
3: Three-phase power balanced input, power factor up to 95%;
4: Lower welding current and electrode pressure;
5: The secondary circuit has almost no inductive energy loss;
6: The electrode life is more than doubled, and the electrode grinding time is reduced;
7: Greatly save the cost of electricity installation and the installation of auxiliary facilities such as water and gas;
8: More accurate, faster and safer control and analysis of welding parameters;
9: Shorter welding time, improve work efficiency and welding quality;
10: The welding range is wider, and the welding effect on mild steel, stainless steel, copper, aluminum and galvanized sheet is better.
| Model |
Input Power |
Rated power |
Secondary short-circuit current |
Electrode pressure |
Electrode working stroke |
Electrode arm extension length |
Maximum welding capacity |
Air source |
Cooling water pressure |
Cooling water flow |
unit price |
| ZYN200 |
220V/AC 50HZ |
10KW |
2KA |
50-500N |
15MM |
68MM |
0.2+0.2stainless steel |
≥0.5MPa |
/ |
/ |
$3,000 |
